1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

QuickVPN setup from WRT54G to WRV54G

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by rakone, Nov 27, 2006.

  1. rakone

    rakone LI Guru Member

    Here’s my setup.

    WRT54G (HOME - with dynamic IP’s of 192.168.1.x)

    WRV54G (WORK - for VPN & internet sharing) connected to
    Dell switch (for LAN all machines have static IP’s of 192.168.1.x)

    I need to connect from home to work mapping a drive from the LAN network with the local IP of 192.168.1.2

    How do I setup this VPN correctly, also I believe I need to port forward or IP forward (not sure which one is correct) to get to that particular machine that I need the drive mapped.

    I searched the forum to setup a Quick VPN but I couldn’t find anything with this scenario with Port forwarding or IP forwarding, if someone could point me in the right direction to get me going.

    Any info would be great.

    Thanks
     
  2. Toxic

    Toxic Administrator Staff Member

    you only need to port forward if you need a particular service on a particular machine. what are you wanting to use on a PC remotely?
     
  3. rakone

    rakone LI Guru Member

    I need to acces a database on the server, i run the application on my laptop & want to acess the data, but since its on the LAN i wanted to know how to acess it.

    Thanks
     

Share This Page