1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

QuickVPN WRV54G log error question

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by breakers97, Jul 7, 2006.

  1. breakers97

    breakers97 Guest

    I've tried searching the forum with no luck. I was wondering if anyone could help me out. I'm trying to connect to my WRV54G router (firmware 2.39.2) via QuickVPN clinet and kept getting stuck at "Verifying Network.." and erroring out "The remote gateway is not responding. You will now be disconnected, please try again later". I've contacted linksys support but they were not able to help me with the problem.

    I've turned on the syslog and here is the result:

    1  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:01 2006 linksys Jul 7 17:33:01 pluto[33]: added connection description "ips50"
    2  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys add_bidir_rule:80: WRV54GFW-CONF: Failed to add rule (File exists)
    3  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:02 2006 linksys Jul 7 17:33:01 pluto[33]: listening for IKE messages
    4  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys add_bidir_rule:80: WRV54GFW-CONF: Failed to add rule (File exists)
    5  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:02 2006 linksys Jul 7 17:33:01 pluto[33]: adding interface ipsec0/ixp1 66.133.231.238
    6  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys add_bidir_rule:80: WRV54GFW-CONF: Failed to add rule (File exists)
    7  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys add_bidir_rule:80: WRV54GFW-CONF: Failed to add rule (File exists)
    9  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys ipnat_add_rule:693: WRV54GFW-CONF: Failed nat control (SIOCADNAT - File exists)
    10  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys ipnat_add_rule:693: WRV54GFW-CONF: Failed nat control (SIOCADNAT - File exists)
    11  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys ipnat_add_rule:693: WRV54GFW-CONF: Failed nat control (SIOCADNAT - File exists)
    12  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys ipnat_add_rule:693: WRV54GFW-CONF: Failed nat control (SIOCADNAT - File exists)
    13  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys ipnat_add_rule:693: WRV54GFW-CONF: Failed nat control (SIOCADNAT - File exists)
    14  Jul 7 10:33: 0 2006 192.168.75.1 Jul 7 09:33:00 2006 linksys ipnat_add_rule:693: WRV54GFW-CONF: Failed nat control (SIOCADNAT - File exists)


    I noticed I keep getting "WRV54GFW-CONF: Failed to add rule (File exists)" message. Anyone know what it means? Any help would greatly appreciated.
     
  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    http://www.linksysinfo.org/modules.php?name=Forums&file=viewtopic&t=11664&start=0

    As always, the first place to start looking is at the computer that has the quickvpn client loaded. Is there another vpn client loaded also? Does the computer have two Nic's? Is IPSEC started in services? Is IPSEC enabled on the router?

    Check through those things first. Generally, these are the minor things that keep people stuck at "verifying network." :)

    Doc
     

Share This Page