R6400 Slow Internet/WAN on Tomato Firmware.

Discussion in 'Tomato Firmware' started by Haldi4803, May 11, 2017.

  1. Haldi4803

    Haldi4803 Reformed Router Member

    Hello.

    For a while i've realised that our Internet speed is maxed out at around 280mbit/s, after calling the Provider they said we should connect the PC directly to the Cable Modem (TC7230). Did so and made a Speedtest.

    Speedtest_PC.PNG
    Everything works fine!


    So using the Advanced Tomato firmware "tomato-R6400-AT-ARM-3.4-140-AIO-128K" i had huge problems with Speed.
    Speedtest_Tomato.PNG
    Maximum 300mbits, Average 285mbits.... Something clearly is wrong here... right? (Oh.. and yeas, i did a NVRAM reset during these Tests, so this result here is the best i could get out of various test over multiple days!)


    To get back to Stock Firmware i've flashed "dd-wrt.v24-K3_AC_ARM_STD_128K" and of course made a Speedtest with this Firmware......
    Speedtest_dd-wrt.PNG
    You can see the Maximum going up to 300mbits, but the average stuck on 120... uhgs!


    So yeah, i've finally flashed back Stock Firmware, "R6400-V1.0.1.22_1.0.17" to be exact.
    Speedtest_Netgear.PNG
    Now look at this! it doesn't look as sweet as on the PC, but it's a Solid 387mbits Average with 497mbits Peak.



    So yes, Stock Firmware is WAY faster than DD-wrt or Tomato, so there has to be something wrong....
    Is it a configuration error? or something in the Firmware?

    Anyone can help me out here?



    Greetings,
    Haldi
     
  2. lancethepants

    lancethepants Network Guru Member

    Advanced -> Miscellaneous -> CTF
    Have you tried enabling this?
     
    Haldi4803 likes this.
  3. Haldi4803

    Haldi4803 Reformed Router Member

    I did, and it did increase the speed by quite a bit!

    Why is this not activated as standard?



    P.S
    [​IMG]

    This is with Tomato and CFT activated and Overclocked to 1000Mhz


    Thanks for all the Help :) this small setting solved it all.
     
    Last edited: May 13, 2017
  4. lancethepants

    lancethepants Network Guru Member

    It's not enabled by default, probably because it's incompatible with a few notable tomato features, like; qos, bandwidth monitor, IP Traffic, Bandwidth limiter etc.
     
    Monk E. Boy and Elfew like this.
  5. zamanex

    zamanex Networkin' Nut Member

    I don't even have this option under Advanced>Miscellaneous, what gives? How can I get it?

    My router is E4200v1 running shibby Tomato Firmware 1.28.0000 MIPSR2-121 K26 USB AIO
     
  6. pomidor1

    pomidor1 Networkin' Nut Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice