1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

R7000 Wifi unstable

Discussion in 'Tomato Firmware' started by thomaz, Oct 18, 2017.

  1. thomaz

    thomaz Networkin' Nut Member

    The only thing i mainly do with wifi is doing "DVBViewer" streaming to my sleeping Room.
    HD 1080i Channel has ~11Mbps.
    And R7000 + Tomato isnt able to do this without problems.

    E3000 with Tomato 140 has 1 Dropout every couple days.
    R7000 with Tomato 140 has 1 Dropout every couple minutes.

    Wifi Router is 2 Meters away through 2 thin indoor Walls.
    I tried every kind of Setting (Country, Antenna A/B, APSD off, Channels, 20/40mhz, Beacon Interval)

    On the Graph below you see how a Lan Transfer drops down from 5,4MB/s to 2,2KB/s.
    [​IMG]

    Now i don't know what to do. :(

    Is the any Tomato Device which delivers stable 220 Mbits WAN/LAN Throughput and has perfect Wifi?
    MIPSR2?
     
  2. pomidor1

    pomidor1 Serious Server Member

    I recommend the drill ;-),
    about wifi nobody will tell you, especially 2.4 ghz is dependent on the weight of things such as neighbor, from the speakers, from the mouse even from electrical devices at the end
     
  3. thomaz

    thomaz Networkin' Nut Member

    now i set everything back to default + channel 13 20mhz + eu + reboot.
    something that was completely failing over the complete last week (i even only got 2MB/s max).
    and now ... it works with 5MB/s.

    i give it up.
    this router or wifi chipset is a lifeform. :)
     
  4. pomidor1

    pomidor1 Serious Server Member

    Try Singapur is magical ;) or US or #a , EU is bad ;) you know ;) brexit etc and
    Transmit Power = 0
    0 is the best
     
    Last edited: Oct 18, 2017
  5. ruggerof

    ruggerof LI Guru Member

    Try these settings:
     

    Attached Files:

Share This Page