1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Radius support with or without WEP

Discussion in 'HyperWRT Firmware' started by vipit, Aug 17, 2004.

  1. vipit

    vipit Network Guru Member

    Hi,
    I try to setup auth with Radius server and wep

    Wireless Security > Security Mode > Security Mode > RADIUS
    RADIUS Server Address: 10.10.1.254
    RADIUS Port: 1812
    Shared Key: Linksys
    Default Transmit Key: 1
    WEP Encryption: 64 bits 10 hex digits
    Passphrase: Linksys
    Key 1: 1111111111
    Key 2: 1111111111
    Key 3: 1111111111
    Key 4: 1111111111

    Router IP is 10.10.1.10 on LAN interface WAN interface is disabled.

    Radius server is configured propertly others AP (Orinoco, Smartbridges, Compex) works on it.
    Linksys WRT54G don't communicate with my radius server on linux (gnu radius) i checked this in linux logs and tcpdump when i setup wep on laptop but disable card in linux radius i still can connect to router from my laptop becouse router don't check for user in radius server.

    How to setup radius external server ? This is firmware bug ?
    Thx
     

Share This Page