1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reaching PPTP behind two routers

Discussion in 'Tomato Firmware' started by maple.chick, Aug 18, 2012.

  1. maple.chick

    maple.chick Networkin' Nut Member

    Hardware:

    1. ISP Modem (192.168.1.200)
    Its basically a 2Wire 3801HGV router but I've disabled everything except the modem functionality. However, I think modem is irrelevant here as:
    a. I have an OpenVPN server which I can connect to just fine from outside the network.
    b. I'm connecting to the PPTP server from inside the network so this shouldn't be a problem.

    2. WRT54G-TM running Toastman (192.168.2.1)
    • Only used for LAN devices.
    • DHCP server / Default Gateway
    • OpenVPN server.
    • Wireless Access Point disabled.
    3. WRT54G running Teaman (192.168.2.20)
    • Used as a Wireless Access Point.
    • PPTP server.
    • DHCP server disabled.
    • All clients are assigned IP from 192.168.2.1
    Setup:
    ISP Modem (192.168.1.200) -----wired----→ WRT54G-TM (192.168.2.1) -----wired----→ WRT54G (192.168.2.20)

    image.png

    Problem:
    Using a Touchpad, I can connect to PPTP server directly on 192.168.2.20. However, I can't seem to use 192.168.2.1 to connect to the PPTP server. I've tried forwarding the port 1723 to 192.168.2.20 but it doesn't seem to be doing the trick. I'm a little lost and would appreciate advice from senior members.
     

Share This Page