1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Recommend Tomato build for e4200 V1 with per IP bandwidth monitoring

Discussion in 'Tomato Firmware' started by pleslie, Aug 22, 2014.

  1. pleslie

    pleslie Network Newbie Member

    • I am looking for a stable build for a Linksys E4200 v1 that supports both radios and has per IP bandwidth monitoring as my ISP is complaing about my monthly usage and I would like to figure out where it's all going.
  2. Marcel Tunks

    Marcel Tunks Networkin' Nut Member

    Shibby, Victek, and Toastman all have stable builds for the E4200v1 with WAN bandwidth monitoring. Choose based on which additional features are needed.
  3. Toastman

    Toastman Super Moderator Staff Member Member

  4. pleslie

    pleslie Network Newbie Member

    Thanks for the quick reply.
    Does that version support the 5 GHz radio?
    If not, is the RT-N version as stable as this one?

    I would also like USB support for the future although I haven't hooked up an HDD yet,

    Thanks for all your hard work
  5. Marcel Tunks

    Marcel Tunks Networkin' Nut Member

    The RT-N version is very stable. I have an E4200v1 running Toastman's firmware with no reboots or crashes for a year and a half (and still counting). I recommend setting the wireless region to "Singapore" and transmission power to "0" (hardware default) for the best performance in the 5GHz radio.

Share This Page