1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Remote admin is not working

Discussion in 'Tomato Firmware' started by poldim, Jan 30, 2014.

  1. poldim

    poldim Reformed Router Member

    I have had this setup and working on various routers for years, not exactly sure when the problem began, but I now can only access from within the LAN.

    Accessing other port forwarded items is no problem, just the router's admin page cannot be accessed.

    Any thoughts?

    Running Tomato Firmware v1.28.7498 MIPSR2-Toastman-VLAN-RT K26 USB VPN
     
  2. shadowken

    shadowken Networkin' Nut Member

    Goto administration > admin access from Remote access drop list select how you want to access your router through http or https and save your settings .
     
  3. poldim

    poldim Reformed Router Member

    Let me be clear. I'm not having trouble setting it up. I've had it running on >10 different routers for >10 years.

    It was working on this router and now it is not. I did not change the settings. I have confirmed the settings are set correctly.

    Still, the set port does not react/route me to the page.
     
  4. shibby20

    shibby20 Network Guru Member

    We are not wizards. We need more info. Please show us screenshots fron admin access, port forwarding and dmz settings.

    Maybe your provider is blocking something?
     
    Last edited: Feb 11, 2014
  5. koitsu

    koitsu Network Guru Member

    @poldim, please use one of the following resources to confirm the issue is indeed with packets directed toward your WAN IP and port, and not related to NAT loopback or other things:

    http://www.canyouseeme.org/
    http://www.yougetsignal.com/tools/open-ports/
    http://www.checkmyports.net/
    http://porttest.net/

    It would also help, as @shibby20 says, if you could divulge all details about your configuration setup. We don't want to make assumptions. If we get to the point where you need to do packet captures to determine if the relevant TCP packets are even arriving across the wire to your WAN port, then we can help with that, but let's start with the obvious first.
     

Share This Page