1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Removing batbox.tar

Discussion in 'HyperWRT Firmware' started by jeff1132, Oct 26, 2004.

  1. jeff1132

    jeff1132 Network Guru Member

    I installed the batbox.tar to see how it looked, alls good and the Telnet and Web server started OK. However, I'm not planning to really use this, so how do I remove it so it doesn't take memory away from the router (and slow it down)?

    I did do a reset thinking that would do the trick, but I see the Telnet and Web server are still running....
     
  2. Toxic

    Toxic Administrator Staff Member

    full reset should do it. press reset for 30 seconds.
     
  3. Avenger20

    Avenger20 Network Guru Member

    Just remove it from the add-ons script and do a router reboot.
    A complete reset does also work, but erases your settings.
     
  4. jeff1132

    jeff1132 Network Guru Member

    I did notice the web server posted a link on the WRT54G(S) word, and clicking it was supposed to return cpuinfo, but I think it just crashed the router.
     
  5. Toxic

    Toxic Administrator Staff Member

    perhaps you could add a feature of a remove button which does this and reboots router for the user?
     

Share This Page