1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Removing Wifi Box

Discussion in 'Other Firmware Projects' started by Ronpow, Feb 26, 2005.

  1. Ronpow

    Ronpow Guest

    How do I load another Firmware after Wifi Box? The router does not seam to have an IP now!

    Please Help!
    Thanks
    Ron

    All Set Thanks
     
  2. gregory

    gregory Guest

    Hello, i don't speack very well english because i'm french. I have make the update with wifibox firmware. My router switch on but access is impossible. How to make to give the origin firmware?

    Cordially
     
  3. jagboy

    jagboy Network Guru Member

  4. wesmoc

    wesmoc Network Guru Member

    Reset to default IP

    More than likely, it has been reset to the system's default IP address. Temporarily change the IP address of your desktop or laptop system that is wired to it as well as the netmask (255.0.0.0) to something that matches the default (check the original Linksys docs).

    Another thing to check is, via a wireless connection, see if you can see the "linksys" SSID. If you can, then the settings are back to the system defaults..
     

Share This Page