1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Removing wrt54g case

Discussion in 'Cisco/Linksys Wireless Routers' started by cybtec, Sep 8, 2007.

  1. cybtec

    cybtec LI Guru Member

    Has anyone found an easy way to remove the WRT54G case without destroying the blooming thing?

    thanks
     
  2. danix71

    danix71 LI Guru Member

    It's very easy as it hasn't any screws hidden (under rubber feet). You just pull gently but firmly the blue-coloured panel from the rest ot it's body, tillting it just a little.
     
  3. mstombs

    mstombs Network Guru Member

    According to this some newer WRT54G do have screws under front feet

    http://www.linksysinfo.org/forums/showthread.php?t=40104

    (see also linked guide with pictures)

    - The ADSL2MUE (same case) also has these screws and the back part of the case slides forward or you break little plastic bits off (easy when you know how) - this can be 'repaired' by putting little screws under the rear feet as well.
     
  4. danix71

    danix71 LI Guru Member

    Anyway, you can search for those screws...you know the place where to search now.
     
  5. cybtec

    cybtec LI Guru Member

    Thanks everyone, with these clues I think I can figure it out.
     
  6. danix71

    danix71 LI Guru Member

Share This Page