1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Repeater Bridge Doesn't Work

Discussion in 'DD-WRT Firmware' started by rony, Oct 14, 2007.

  1. rony

    rony Guest

    I have just successfully flashed my WRT 54G v5 from VxWorks to dd-wrt.v24_micro_generic.bin. I used instructions from Bitsum Technologies wiki WRT54G5 CFE. This completed without any problems.

    I then wanted to use my wrt 54g as a repeater bridge. I used instructions from dd-wrt wiki. It doesn't work
    The wireless adapter doesn't even see my router.
    In instruction (5) you are told to use a different ssid than the primary but this always reverts to the primary ssid.
    Everything else seemed to have the expected results but I cannot connect to the internet via the primary router.
  2. TheGIZ

    TheGIZ Network Guru Member

    When I first loaded DD-WRT it wouldn't accept any configuration changes. Once I unplugged it and hooked it back up... its worked for several days now.

    To new to the new firmware to be really sure.

    Hope it helps.

Share This Page