1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reset QoS Settings

Discussion in 'Tomato Firmware' started by jochen, Oct 15, 2007.

  1. jochen

    jochen LI Guru Member

    Is there a way to reset QoS settings to default values? I think I made some mistake. Browsing becomes very slow, some time after a reset.
     
  2. roadkill

    roadkill Super Moderator Staff Member Member

    Administration -> Configuration -> Restore Default Configuration -> Restore default router settings (normal)
     
  3. pharma

    pharma Network Guru Member

    @Jochen,

    If you don't want to reset all your router configuration settings, follow the link below for the default QOS settings.

    http://www.linksysinfo.org/forums/showthread.php?p=308491&highlight=default+qos#post308491

    Edit: I did notice one difference between my settings and the link above ...
    Default Class - should be set to Low

    If you also need the QOS classification settings, Jon has a detailed explanations of the default QOS classification settings at www.polarcloud.com .

    http://www.polarcloud.com/tomatofaq#can_you_explain_how_the_qos_ru

    Pharma
     

Share This Page