1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Router clients problem

Discussion in 'Tomato Firmware' started by Steelgunner90, Jan 1, 2008.

  1. Hi I recently set up wds on my 2 wireless routers both running the latest tomato firmware but theres a problem i noticed. Router 1 is a WRT54GL 1.1 that is setup in wds-ap and is connected to the WAN, Router 2 is a WRT54G 1.1 is also in wds-ap mode. Both are on channel 1, have the same ssid, using WAP-psk with the same key and are manually set to wds to each others mac address. The problem is all the wireless clients no matter where they are connect to router 2, even if im right beside router 1. Everyone can connect to the internet fine however it is just if someone is far away from router 2 they get a bad signal. Im not sure if this is a bug or a problem with my setup or even with the computer(although i doubt it because there are 7 different wireless computers on the network) If you need anymore information just ask.
    Thanks
     

Share This Page