1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

router info by ssh

Discussion in 'Tomato Firmware' started by bjlockie, Jan 17, 2013.

  1. bjlockie

    bjlockie Addicted to LI Member

    If I ssh to my router, how do I get:
    CPU Freq
    Flash RAM Size
  2. gfunkdave

    gfunkdave LI Guru Member


    dmesg | more
    and page through it. I know the Chipset is in there (under CPU).
  3. koitsu

    koitsu Network Guru Member

    dmesg is not going to show any of this information in a sane/accurate manner. Compare, for example, the information in dmesg to that in the TomatoUSB GUI (Status -> Overview page).

    The answer to this question is: take a look at the TomatoUSB source code for the GUI bits that show Chipset, CPU Frequency, and Flash Size. You may be surprised what rigmarole has to be done to get this information accurately. :)
  4. Planiwa

    Planiwa LI Guru Member

    You can start with
    If you are interested in how sysinfo gets its information, you can run
    less $(which sysinfo)

Share This Page