router port to WAN

Discussion in 'Tomato Firmware' started by x-demon, Apr 28, 2009.

  1. x-demon

    x-demon Addicted to LI Member

    How i can use iptables for adding router's port to WAN access? I think it something like
    Code:
    iptables -I INPUT 1 -p udp --dport 161
    on forums i saw that there is also "-j logaccess", but tomato says that -j is invalid option... so, what i must do?
     
  2. x-demon

    x-demon Addicted to LI Member

    Code:
    iptables -I INPUT 1 -p udp --dport 161 -j ACCEPT
    - no success =(
     
  3. michse

    michse Addicted to LI Member

    hi,

    "iptables -I INPUT 1 -p..." the "1" is wrong I think.

    iptables -I INPUT -i vlan1 -p udp --dport 161 -j ACCEPT or

    iptables -I INPUT -i ppp0 -p udp --dport 161 -j ACCEPT should work

    michse
     
  4. x-demon

    x-demon Addicted to LI Member

    It doesnt work too. Pppoe connection, if it can help.
     
  5. michse

    michse Addicted to LI Member

    I don't understand your question. what do you want to do?
    port 161 is snmp. do you want to reach a snmp daemon on your router? your iptables rule looks like so.
    michse
     
  6. x-demon

    x-demon Addicted to LI Member

    Sorry me! All works as it must works. Yes, i opened snmp to wan for one ip, where is cacti installed. Cacti not working with tomato atm, but i can access cnmp with snmpwalk.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice