Routing a subnet

Discussion in 'Other Linksys Equipment' started by olobley, Aug 24, 2004.

  1. olobley

    olobley Network Guru Member

    I'm wondering if _anyone_ can help...
    I've contacted linksys support, and got _nothing_
    I have a WAG54G, and an 8 IP subnet from my ISP.
    I _know_ there is nothing wrong with the physical link back to the ISP, as I've had it running quite merrily before on both a Zoom X5 modem/router, and a D-Link D804GT.
    I bought the WAG54G on the advice of a 'friend', however I've had nothing but trouble since.
    For a start, the linksys won't let me assign the same IP to the internal network card as the PPP device gets allocated by the ISP (no biggy!).
    Then, I get _exactly_ 30 seconds of connected time before the WAG54G disconnects the DSL line. During those 30 seconds, all 8 IP's work fine.
    I know there is no issue with the ISP, as I can swap the linksys out, and presto, _any_ other router works.
    I've tried firmwares 1.7, 2.1 and 2.3, _all_ exhibit this behaviour.
    If I leave the router in nat'ed mode (ie it's on 192.168.1.1, it works fine, although that kind of defeats the point of having an 8 IP subnet...)
    I'm getting close to seeing what happens when the linksys is introduced to my blender...

    Cheers,

    Olly.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice