1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Routing between 2 RVS4000 - Dual WAN

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by orbitaltech, Feb 23, 2008.

  1. orbitaltech

    orbitaltech Guest

    I currently have 2 RVS4000's in the same physical location (sitting next to each other). Each one has a separate ADSL connection, is using DHCP and has it's own unique subnet. Can I get the two routers to communicate with each other and not use the bandwidth of the other router?

    I hope I am being clear and that this can be done. Many thanks. :smile:
     
  2. samuel613

    samuel613 LI Guru Member

    I am not at all sure what you mean, but if they have separate DSL connections and you don't want to run a cable between the two routers, you can set up a VPN tunnel between them.

    I can't imagine why you'd want to, though.
     
  3. DocLarge

    DocLarge Super Moderator Staff Member Member

    I'm assuming you're doing some testing :)

    If you set up a vpn between the two, you will be tapping into the bandwith of both routers because vpn comes with some overhead by default.
     

Share This Page