Routing problem

Discussion in 'Cisco/Linksys Wireless Routers' started by arian40, Feb 27, 2011.

  1. arian40

    arian40 Networkin' Nut Member

    Hi all.

    I have a WRT54GS which I have bridged wirelessly with my other router.
    I made both router to be in the same network
    example
    (R1 = 10.0.0.1 255.255.0.0 - R2 10.0.1.1 255.255.0.0)

    and it worked fine both routers connected but i read a few forums and from the experiance I had it was running slow and apparently if you put them on diffrent network and route them together it would work faster.

    so what i did was

    (R1 = 10.0.0.1 255.255.255.0 - R2 = 10.0.1.1 255.255.255.0)

    abviously they stopped communicating and Router(2) ? (I think) needed a route command but I do not know what the Destination and gateways and interfaces will be.

    Could some one please help me??

    I have also did a quick mockup of my network if it makes life easier.

    Thank you


    Arian
     

    Attached Files:

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice