1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Routing through a SpeedTouch 716?

Discussion in 'Networking Issues' started by Jonix, Aug 7, 2006.

  1. Jonix

    Jonix LI Guru Member

    Sorry if this is a kind of common question, but I did try and search without getting any use ful hits. So here we go...

    I've just changed ISP, and they sent me a combo box, a Thompson SpeedTouch 716G containing modem, wlan and a 4-port router/switch. Since I wish to keep my WRT54GS v4, I need to figure out how to set up the traffic flow (if possible...)

    ISP - ST716G - Linksys - LAN

    The ST716 is on 192.168.1.254 and the Linksys is on 192.168.0.50. What do I need to do to get them to talk to each other. The ideal would of course be if there was an option to turn off all but the modem part on the ST716, but there's no such option...:mad:

    Thanks in advance!
     
  2. Jonix

    Jonix LI Guru Member

    Never mind... I managed to figure it out on my own. :) I had mistakenly put both sides on the Linksys on the same subnet.
     

Share This Page