1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

rp-pppoe-relay on tomato+wrt54gl

Discussion in 'Tomato Firmware' started by kwagga, Feb 16, 2011.

  1. kwagga

    kwagga Networkin' Nut Member

    Hi Guys,

    My Tomato WRT54gl currently dials PPPOE connection for my network, however, I would like some clients within the network, to also dial their own pppoe connections, my old D-Link router used to allow it, and as far as I know, most adsl modems also allow it. But how do I get tomato to allow pppoe connections within the network.

    Connecting the ISP cable to a switch, and then tomato WAN+LAN to the same switch, is unfortunately not an option, although that would work.

    So far, I've read, rp-pppoe-relay allows for pppoe dialing on dd-wrt, is there anyway I can use OpenWRT backports (rp-pppoe-relay_3.8-1_mipsel.ipk) on Tomato 1.28?

    Any advice would be appreciated!

    Thanks in advance,

  2. rhester72

    rhester72 Network Guru Member

    The OpenWRT build will not work without a *LOT* of library tap-dancing.

    I compiled rp-pppoe (including pppoe-relay) on my site - appears to be sane but have not tested (do not have ability to do so). Feedback welcomed.


Share This Page