1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RT-N10U - new router with USB supported by tomato

Discussion in 'Tomato Firmware' started by shibby20, Oct 5, 2011.

  1. shibby20

    shibby20 Network Guru Member

    RT-N10U:
    CPU - BCM5357 @300MHz
    RAM - 32MB
    Flash - 8MB
    USB - 1x
    WLAN - Nlite 150Mbps
    LAN - 4x 100Mbps
    WAN - 1x 100Mbps

    Supported by:
    - ddwrt - Yes
    - openwrt - No yet, WIP
    - tomato - WIP, Only with new driver!

    I added rtn-10u support to tomato-rt-n branch and we have:
    [​IMG]

    LAN, WAN, WLAN and USB works. Leds and buttons fully supported.
    CPU detection - correct.
    TODO: testing :) merge with tomato-shiby branch.

    We will have the cheapest Router with USB supported by Tomato!
    Best Regards!
     
  2. Toink

    Toink Network Guru Member

    Great work, Shibby20!

    Question: Flashing to Tomato is directly via web interface or through TFTP.exe or Asus utility? Thanks!
     
  3. shibby20

    shibby20 Network Guru Member

    i used ddwrt first and then tomato but i think flashing VIA TFTP (router listening on 192.168.1.1) or asus firmware restoration is also available.
     
  4. shibby20

    shibby20 Network Guru Member

    leds and butons are supported. First post updated.

    Transfer from router (ntfs) via ftp = 4,18MB/s (router has only 300MHz cpu well i say result is pretty well :) )
     
  5. Toastman

    Toastman Super Moderator Staff Member Member

    Been reading on the forums, it is said that the CPU can actually clock at 480 just the same as the other chips we are familiar with. I wonder who will be the first to try it here? ( It would be me, but I haven't got one).

    This is the "new" equivalent of the WRT54GL, in many ways -which some people have been asking about recently.
     
  6. shibby20

    shibby20 Network Guru Member

  7. 56kb

    56kb Addicted to LI Member

    FW file 7.4 MB ?
     
  8. shibby20

    shibby20 Network Guru Member

    indeed, RT-N10U has 8MB flash.
     
  9. M_ars

    M_ars LI Guru Member

    shibby what about the transferspeed (read and write) via ftp usting ext3/ext2? Can you check that please? NTFS is probably not the best for this little router :)
    thx
     
  10. clarknova

    clarknova Networkin' Nut Member

    Anybody have a source for these in North America? I'm not seeing any.
     
  11. Benik3

    Benik3 Reformed Router Member

    Hi.
    I have at home this router.
    First time I tried DD-WRT, but I had problems with Wi-Fi, also print server worked, but I wasn't able to get any info from the printer.
    Original FW has good print server, but slow wi-fi (only about 30Mb/s with 802.11n 40MHz).

    So that's why I'm here :)
    I want to know, how Tomato works on the RT-N10U. The main function for me is the print server...

    I found, that RT-N10U with USB should be supported with mods Shibby, Victek and Toastman (+ teddy bear, which is no longer updated, right?)

    So can anyone provides some info/tips?
    Thanks :)
     

Share This Page