1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RTt-N16 Tomato wireless speed

Discussion in 'Tomato Firmware' started by gwww, Feb 18, 2010.

  1. gwww

    gwww Addicted to LI Member

    hi all, just received my new RT-N16 last night and wasted no time putting tomato on it. seems to work fine except for wireless speed. top speed as listed by windows when connected in "n" mode is 54mb -- can't seem to get it to the 100+mb speeds i would expect. i did a reset of config and changed the wmm to enable. no other changes to config from the default reset config. i have read pretty much this entire thread and has not seen any other tips to try. any ideas of what to look at? thanks.
  2. ladysman

    ladysman LI Guru Member

    Are you using encryption?
    What frequency is the radio set at?
  3. gwww

    gwww Addicted to LI Member

    Everything set at defaults except WMM. So -- no encryption, radio at default 40mhz (not at router right now so cannot check the out of the box setting).


    CHRONOMASTER Addicted to LI Member

    Try setting your channel to 6 or 11, keep it at 40 mhz and set encryption to "WPA2 Personal (PSK) + AES". Also retest it with WMM on then off.
  5. gwww

    gwww Addicted to LI Member

    working better now -- getting 130 mb. thank-you all... i will keep testing and providing any feedback that i can to help make this a kick butt system.
  6. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Created a new thread for this discussion. Please refrain from hyjacking threads

Share This Page