1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

rule to disable 2.4 Ghz wifi while keeping 5 Ghz up

Discussion in 'Tomato Firmware' started by molnart, Apr 17, 2012.

  1. molnart

    molnart Addicted to LI Member


    i have finally replaced my old Asus WL500gP with a Linksys E3000. On my other routers i am using the Access restriction settings to disable wifi during the night and when i am not at home. However with the dualband linksys i would like to use separate rules for the 5Ghz and the 2.4 Ghz channel.

    The Access restriction page only allows to disable all wifi communication. I understand that probably i will need to set up some scripts through the scheduler. The questions is what commands to use to disable the particular wifi frequencies?

  2. Planiwa

    Planiwa Network Guru Member

    Check out the wl command.

    Also, the nvram command.

    (Both are monsters.)
  3. molnart

    molnart Addicted to LI Member

    great, thanks

Share This Page