I replaced an RV082 with an RV016 and was surprised to see that the backup VPN option doesn't exist in the 016. Is there any workaround for this? I get the same irritating error if I try to create a 2nd VPN that I get on any of the RVs if the remote subnet is in "conflict". The remote endpoint IP or local subnet are different but the RV still prevents saving the profile. So I gained more than 2 WAN ports but lost the ability to use them as backup VPN endpoints. Unless I'm missing something obvious this is a serious oversight in the front end. IPSEC spec allows me to have an apparent conflict in subnets as long as only one is active.