1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rv016 problem block

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by diceman, Jun 23, 2005.

  1. diceman

    diceman Guest

    Hello, I have acquired a linksys rv016 in America in order to use it in Italy. I have found the following problems:
    1) I do not succeed to modernize firmware 2.0.3 from the 1.3.2. it always says to me login incorrect
    2) making the several tests the Router does not work more: ( also making reset it does not assign to more the IP to me in dhcp. is dead!

    How I can resolve?
     
  2. SpeedStreet

    SpeedStreet Network Guru Member

    diceman,

    Forgive me for not understanding the second issue, but I can be of help for #1: When upgrading from 1.3.2, you must upgrade to the 2.0.0 firmware first. Trying to bypass this upgrade will result in a failure.

    Hope this helps!
     
  3. NetDog

    NetDog Network Guru Member

    You must upgrade to version 2.0.0 firmware first, then when you get the bad login retry using user name admin, password admin. when going to 2.0.0 my router reset to factory defaults and require factory login to work. Just a thought?
     

Share This Page