1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 allows external connections for about an hour and then refuses pings

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Enze6997, Aug 21, 2006.

  1. Enze6997

    Enze6997 LI Guru Member

    I have a RV042 setup as a VPN box. When it is first turned on I can access the box remotely perfectly (though I have not gotten a decent VPN connect) after about an hour suddenly the box just ignores all incoming connections from the outside, even pings. Internal connects are still allowed. Even went as far as to turn off all firewalling and such to test this issues.

    Firmware I think. Its the latest from Linksys's site.
  2. Toxic

    Toxic Administrator Staff Member

    the latest official is from Linksys. we have here in the downloads v1.3.7.9 which is a beta firmware with many fixes. can you confirm what MTU you are using at present on the RV042?
  3. Enze6997

    Enze6997 LI Guru Member

    Never changed any of the MTU settings. The RV042 is connected directly to a static IP on the internet.

Share This Page