I just changed to firmware 220.127.116.11 today to fix the problem I was having using FTP in load balance mode. Problem solved, but now when I try to connect to a VPN using the Cisco client that worked before, for whatever reason I can't make a connection. I tried disabling the firewall on the RV042 so I could start to troubleshoot the ports that needed to be opened, but even with the firewall totally off I can't connect. Any ideas of other things I should look for? The only way right now I can get the connection going is through DMZ, which isn't very helpful, becase several machines on the network use this VPN.