1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 fail to upload with many connection

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by DummyPLUG, Mar 9, 2006.

  1. DummyPLUG

    DummyPLUG Network Guru Member

    I own a RV042, with the firmware, if uploading at 10Mbit/s, with about 40~60 outgoing connection at the same time, the router will stop upload and stop responce for about 5 seconds with every 10~15 seconds. I had try to disable firewall, no VPN, no upnp, using DMZ, etc. but still didn't find a solutions. and this is not applicaiton specific.

    My current work around is to limit it not upload more then 300Kbit/s, or limit it to have below 30 upload connection at the same time.

    Anyone else have the same problem with me? The most interesting is download is ok, just upload have the problem.
  2. DummyPLUG

    DummyPLUG Network Guru Member

    using the new firmware I still have the problem, but I found a workaround, it is using cfosspeed, but this workaround didn't work on previous firmware. Strange. :thumbdown:

    Will do some more testing after dinner... :thumbup:

Share This Page