RV042 Multiple VPNs

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by fred3, Aug 5, 2007.

  1. fred3

    fred3 Network Guru Member

    I'm trying to set up an RV042 with multiple VPNs.

    The need is to terminate two VPNs between the same 2 sites:

    - one subnet at Site 1

    - two subnets at Site 2

    Because there are two subnets at site 2, it appears that 2 VPNs would be needed:

    Site 1: 192.168.1.0 / 24 Tunnel 1 to 192.168.2.0
    Tunnel 2 to 192.168.3.0

    Site 2: 192.168.2.0 /24 Tunnel 1 to 192.168.1.0

    Site 2: 192.168.3.0 /24 Tunnel 2 to 192.168.1.0

    But, at Site 2, it doesn't seem that the RV042 wants to point two VPNs to the same remote subnet 192.168.1.0 / 24. It responds with an error:
    "The value 192.168.1.0 conflict with 192.168.1.0 !"

    Any suggestions or insights?

    Thanks!
     
  2. ifican

    ifican Network Guru Member

    what not just use a single subnet? As long as the router will accept supernets you can use 192.168.2.0 255.255.254.0
     
  3. fred3

    fred3 Network Guru Member

    Yes, I suppose I could do that. But, that doesn't help me understand the RV042 rules..... which is something I'm trying to get a better handle on.
    The result seemed strange.....
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice