1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 NAT problem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by virtuozzo, Jun 13, 2006.

  1. virtuozzo

    virtuozzo LI Guru Member

    I have my RV042 router working as NAT gateway. LAN interface has binded IP 192.168.2.1.

    But hosts which have IPs which are not a part of 192.168.2.0/24 network cannot access the extranet:
    [php:1:d5882939f7]
    [root@lab02 ~]# traceroute -s 192.168.102.11 66.94.234.13
    traceroute to 66.94.234.13 (66.94.234.13) from 192.168.102.11, 30 hops max, 38 byte packets
    1 192.168.2.1 (192.168.2.1) 0.580 ms 0.377 ms 0.351 ms
    2 * * *
    [/php:1:d5882939f7]

    What rules should I add to grant access for network 192.168.0.0/16 to access the Internet?

    Thank ahead.
     
  2. TazUk

    TazUk Network Guru Member

    What connects the two IP networks?
     
  3. virtuozzo

    virtuozzo LI Guru Member

    TazUk,
    Network 192.168.0.0 is (or should be) connected to Internet (0.0.0.0). Router has LAN IP set to 192.168.2.1 with mask 255.255.255.0.

    The problem is that hosts which do not match LAN mask (i.e. 192.168.102.11) are not able to access the Internet.

    So is it possible to make them able to access WAN?
     
  4. Toxic

    Toxic Administrator Staff Member

    you need to tell the hosts where the gateway is, they dont know.

    goto each host and set the gateway to 192.168.2.1
     
  5. virtuozzo

    virtuozzo LI Guru Member

    They know, I've set it. Also, as you see, traceroute selects a correct gateway:

    The problem is that it looks like the packages are being filtered.
     
  6. Toxic

    Toxic Administrator Staff Member

    try putting some static routing into the rv042 advanced routing tables.

    if you think it is being blocked then try adding some firewall access rules for the hosts.
     

Share This Page