1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 one to one nat and port forwarding

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by techman10, Aug 29, 2006.

  1. techman10

    techman10 Guest

    Having an issue with 2 RV042 which are setup with a Gateway to Gateway IPSec Tunnel. Cannot get a one to one nat working for some reason. Can get port forwarding to work but need to set access to an inside address on a different public address. Do not want to use the public address on the router. Want to do one to one nat for our mail server.... Any issues that anyone knows of? running 1.3.7.4 code. Didn't want to update firmware if I did need to but if it will fix the one to one nat the I will.
     
  2. pablito

    pablito Network Guru Member

    I don't have an answer for you but I'll ask a question. The VPN isn't causing an issue with One to One right? In other words One to One isn't working at all? And you've tried it from an IP other than the VPN endpoints?

    It might help to have more details of your public IPs (do the subnets overlap or require distinct gateways etc.). One to One can be tricky to get right so it might be just a config issue.
    The beta firmware fixes other issues but if you're working well except for One to One you might want to hear from someone that has it working before upgrading.
     

Share This Page