1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 Problem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by calvin86, Aug 10, 2006.

  1. calvin86

    calvin86 LI Guru Member

    I'm facing connection problems when I'm using load balancing on this router. I've already flashed it to the latest beta firmware from this webpage too . :frown: when I changed it back to smart link backup the connection never dropped at all..

    both of my connections are from the same internet provider.. would this be the cause of my internet getting disconnected frequently ? Would like to get opinions from every members here..Thanks :thumbup:
     
  2. iccountants

    iccountants LI Guru Member

    I had exactly same problem.

    I read some suggestion here and followed it and I put WAN1 directly to modem and place another router between WAN2 port and Modem. and set static IP for WAN2 192.168.2.10. (LAN IP range in Middle router is 192.168.2.XXX series and LAN IP of Middle Router is 192.168.2.1) I also made protocol binding saying all the traffic from "Non server" computers from my network to WAN2 and things are working perfactly without any problem.

    This solved my problem. I dont know "why" but its working fine now.

    Hope this helps.
     
  3. d__l

    d__l Network Guru Member

    I read some place that the RV routers (don't remember which model, either 042 or 082) had some problems load balancing when the WAN IPs were in the same class C subnet. Would this fit your situation?
     

Share This Page