1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 to BEFVP41 VPN with both behind NAT

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Sfor, Apr 28, 2009.

  1. Sfor

    Sfor Network Guru Member

    BEFVP41 is placed behind Axesstel MV410R VPN passthrough capable router with ports 500 and 4500 forwarded to the BEFVP41 WAN port (192.168.0.200).
    - NAT-Traversal option turned on
    - The remote gateway is set to "Any".

    RV042 is placed behind NAT router I do not have the control of.
    - NAT-Traversal option for the tynnel is turned on.
    - The remote gateway is set to the remote MV410R WAN IP

    The VPN tunnel negotiation does not consider using NAT traversal, as far as I can see. The RV042 complains in the log:

    Code:
    Apr 28 12:48:14 2009     VPN Log    [Tunnel Negotiation Info] >>> Initiator Send Main Mode 1st packet  
    Apr 28 12:48:19 2009     VPN Log    [Tunnel Negotiation Info] <<< Initiator Received Main Mode 2nd packet  
    Apr 28 12:48:19 2009     VPN Log    [Tunnel Negotiation Info] >>> Initiator send Main Mode 3rd packet  
    Apr 28 12:48:21 2009     VPN Log    [Tunnel Negotiation Info] <<< Initiator Received Main Mode 4th packet  
    Apr 28 12:48:21 2009     VPN Log    [Tunnel Negotiation Info] >>> Initiator Send Main Mode 5th packet  
    Apr 28 12:48:21 2009     VPN Log    [Tunnel Negotiation Info] >>> Initiator Receive Main Mode 6th packet  
    Apr 28 12:48:21 2009     VPN Log    Main mode peer ID is ID_IPV4_ADDR: '192.168.0.200'  
    Apr 28 12:48:21 2009     VPN Log    We require peer to have ID '79.162.212.12', but peer declares '192.168.0.200'  
    Apr 28 12:48:31 2009     VPN Log    [Tunnel Negotiation Info] >>> Initiator Receive Main Mode 6th packet  
    Apr 28 12:48:31 2009     VPN Log    Main mode peer ID is ID_IPV4_ADDR: '192.168.0.200'  
    Apr 28 12:48:31 2009     VPN Log    We require peer to have ID '79.162.212.12', but peer declares '192.168.0.200'  
    Apparently the RV042 does not consider to use NAT-Traversal, for some reason.

    I'm unable to switch the MV410R to the gateway mode. So, I have stucked.
     

Share This Page