1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV042 to RV042 VPN

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by helldriver, Jun 20, 2006.

  1. helldriver

    helldriver Network Guru Member

    Hi,

    for the first sorry for my english it not my strong side.
    I have installed two RV042 at two endpoints. I had configured the VPN.

    It looks like this:

    On the A Side Local Ip is 192.168.0.254
    On the B side Local Ip is 192.168.1.1

    The subnet is 255.255.255.0

    The internet Ip is Dynamic and will be droped every 24h because of the german telekom.

    So the problem i have is that everything is working fine but if one of the routers lost the ip and get the new one the vpn will be apear still conected in the menu but it doesnt work. The only way to get it to work is to disconnect and connect it again then it will be work fine again.

    What i have done wrong where i must change my configuration to get it working all the time.

    I thank you very much for your help.

    See you
    Helldriver
     
  2. Toxic

    Toxic Administrator Staff Member

    use DDNS support then. www.dyndns.org this removes the problems associated with dynamic IP addresses.
     
  3. helldriver

    helldriver Network Guru Member

    i already use the ddns support otherways it will not working.

    hell
     

Share This Page