1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV082 and Draytek router - IPSEC LAN-LAN VPN tunnel

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by morpheme, Mar 23, 2006.

  1. morpheme

    morpheme Network Guru Member

    The subject says it all really - anybody managed to get one working?

    Not attempted it yet as IPSEC scares me... especially between devices from different manufacturers. Wondred if anybody could offer any advice?

    Andy.
     
  2. tmm14

    tmm14 Network Guru Member

    My expiriens wasn't lucky.
    Draytek and linksys make tunnel between each other but it works very unstable,it drops and recovers every 5-10 sec.
    Stable work is only with device from one manufacturer(linksys to linksys and Draytek to Draytek.)
     
  3. morpheme

    morpheme Network Guru Member

    THanks, I had a feeling that may be the case.

    At the moment, I'm connecting from a draytek at home to a very old draytek in the office, but want to retire the office draytek and move all VPN traffic over to my RV082 which is hardly used at the moment. Guess I'll have to look at a linksys product at home too if I want to do this.

    I've studied the Linkysys product lineup and there doesn't seem to be anything that fits my needs:

    ADSL2+ modem
    Wireless
    VPN termination

    Is this the case?

    Andy.
     
  4. TazUk

    TazUk Network Guru Member

  5. TazUk

    TazUk Network Guru Member

    The old WAG54Gv2 does all those things but it's discontinued now :cry: Closest thing to it in the current range is the AG241, the only thing it misses is wireless but that can be added by sticking a WAG54G on top :)
     
  6. morpheme

    morpheme Network Guru Member

    Never one for being beaten by these things... Have managed to get an IPSEC tunnel running between my RV082 and my Draytek 2600. Only been up for 20 minutes or so, but looking good so far.

    Will post back here with further details on its stability.

    If anybody wants to know what settings I used, just ask.

    Andy.
     
  7. infinity005

    infinity005 LI Guru Member

    Can you provide pointers on how you did this?
     
  8. sztomi

    sztomi Guest

    Hello, pls post your settings of the draytek & linksys routers. Thx.
     

Share This Page