1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV082 and VPN

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Monsoft, Aug 20, 2005.

  1. Monsoft

    Monsoft Guest

    I know that my questions maybe are a stupid but I need some infromation.

    1. How many connection I can make in this same time using Linksys Quick VPN client ?? When I make one it's ok, but if I try make another one, that I recive error about "problem with access to the remote gateway".

    2. Is Quick VPN client for working need vpn tunnels ?? I don't have created any tunnels but I still can make connection.

  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    Only one connection at a time is allowed when using quickvpn. So, if five people in your office wanted to use quickvpn, whomever connects first will be the "one and only" person to use the vpn connection; everyone else will have to wait and squabble to be next in line once the first person disconnects from their session.

    If you want to create tunnels, then you need to have a wrv on "both" sides (where you are right now and at the side you want to connect to). Should you get another wrv54g, here're are two examples left by Kompressor to show you how to do it:



    Whatever settings you specify for the first router you configure, make sure you just do the reverse for the second router.

    I'll use this type of configuration occasionally, but for a small to medium office environment, a wrv54g-to-wrv54g configuration (dedicated connection) would be the best solution if you have other users needing to connect to a remote location.


Share This Page