1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV082 Bug

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by ccb056, Aug 31, 2008.

  1. ccb056

    ccb056 Network Guru Member

    I found a bug with the RV082 but I have no idea where to send it to at Linksys.

    This is how the bug works:

    Reset firmware to factory defaults
    Flash to 1.3.98-tm (latest version)
    Reset firmware to factory defaults
    Change router's IP address to 192.168.2.1

    Up until here, everything works fine

    Go to VPN - VPN Client access
    Create a user and activate it

    Creating a VPN user causes the bug

    The bug:
    You can access the router's webui using http://192.168.1.1 even though you cannot ping that address and the router is configured for 192.168.2.1

    This bug is very annoying if you have 2 RV082's vpn'd where one has an internal IP of 192.168.1.1 and the other has an internal IP of 192.168.2.1

    When you are on the 192.168.2.x network, you cannot access the 192.168.1.1 router.
     
  2. Toxic

    Toxic Administrator Staff Member

    this had been reported to linksys sometime ago. there answer was it was not a bug but a feature :)

    the only workaround for you is to change the ip address of the RV042 192.168.1.1 to 192.168.3.1 perhaps.
     

Share This Page