1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV082 Dual WAN Problem and ask for firmware history

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by breuer, Jun 14, 2007.

  1. breuer

    breuer Guest

    Hi there,

    we have got a problem regarding the RV082 with the Dual-Wan Option.
    Both WAN-Ports are connected to UMTS Cubes which are connected to the Internet. By disconnecting one cube and reconnecting it again, the connection to the internet will not be automatically established again.

    I would like to know where i can find a complete version history of the firmware, where i can check if this problem is (maybe) solved already.


  2. pablito

    pablito Network Guru Member

    What is a UMTS cube? How are you configured on the WAN ports? static/dhcp/pppoe? The default check under dual wan is to ping the default gateway. Is that IP on the cube or beyond? You likely want to set it to an IP that is beyond your router/cube/whatever. Normally the GW is just beyond the router/modem and is good enough.

    And yes, make sure you are at the latest firmware version. There should be a readme with a history there.
  3. Toxic

    Toxic Administrator Staff Member

    Are you using the Network Detection Service?


Share This Page