1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rv082 : Nat / Pat

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by aver5, Aug 28, 2006.

  1. aver5

    aver5 LI Guru Member

    is someone know a solution to make nat forwarding like this sample

    From wan with port 8888 to LAN address port 9090

    Best regards

    (10 RV082 actually testing firmware
  2. d__l

    d__l Network Guru Member

    You can do that with UPnP. First you will have to set up your own service in Service Management under UPnP- something like MyService TCP External Port 8888 to Internal Port 9090 - and add and save that to the available services.

    Then you select that service for IP Address and enable it. Also enable UPnP.

Share This Page