1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV082 NAT problem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by ecullen, May 25, 2005.

  1. ecullen

    ecullen Network Guru Member

    Can someone help me out here. Networking is not my strongest subject.

    I am trying for a while now to NAT a number of different networks to an Internet connection.

    RV082 LAN ip is at

    My example NAT table looks like ...

    Dest IP: GW: LAN
    Dest IP: GW: LAN
    Dest IP: a.b.c.d/32 GW: WLAN1
    Dest IP: p.q.m.x/32 GW: WLAN1
    Dest IP: p.q.n.y/32 GW: WLAN1

    where a.b.c.d is the internet IP,
    p.q.m.x and p.q.n.y are the DNS servers.

    The rv082 connects to the internet so is set up as gateway.

    I dont know if I am trying the impossible or not. I have included the internet IP and DNS IP's in the above. From for example one of the LAN networks I can see the LAN and ping it, but cant see anything on it.

    Should I be using multiple routers, or is the above not possible or are there NAT restrictions ? I have tried so many different NAT configurations, with no luck.

  2. gaudior

    gaudior Guest

    Beta Firmware

    We had the same problem with anRV042 and tech support said they would email us a beta firmware to resolve the issue. We have not received it yet but once we do I will let you know how it worked.

Share This Page