1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV082 Quickconnect problem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by fanadonf, Dec 26, 2005.

  1. fanadonf

    fanadonf Network Guru Member


    I have a RV082 and i try to make a vpn conexion with linksys quickvpn

    Local network ip : (dhcp by a asus wl500g router)

    Local network on rv082
    https enable
    no forwarding on 443 and 500 ...
    hostname live blank
    firewall enable (standart rules)

    ipsec config of quickvpn :

    conn HostToRemote

    vpcserverconfig :

    conn marc_quickvpn_rw

    wget config :

    --20:44:34-- https://marc_quickvpn:*password*@XX...version=1?IP=
    => `C://Program Files//Linksys//Linksys VPN Client//vpnserver.conf'
    Resolving XXXXXXXX... XX.XX.123.138
    Connecting to XXXXXXX[XX.XX.123.138]:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]

    0K 151.37 KB/s

    20:44:37 (151.37 KB/s) - `C://Program Files//Linksys//Linksys VPN Client//vpnserver.conf' saved [155]

    on client connexion block on :
    Verifying network
    and when i wait i have :
    The remote gateway not responding.You will be disconnected, please try again
    (firewall is disable on local computer)

    Last us linksys firmware and quickconnect client
    The pptp server is open and working with no problem but quickvpn no !!

    Any idée ?
  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    You can't use quickvpn and the PPTP server at the same time; it has to one or the other...

    Also, you don't have to forward any tunnels for quickvpn to work (namely 443 and 500) because the routers firmware already has these settings automatically configured. Port 443 is "always" open so it can listen for a connection from the quickvpn client.

    Email me at cyberpsych1@yahoo.co.uk and I'll send you a copy of the "Quickvpn Setup Guide."

  3. fanadonf

    fanadonf Network Guru Member


    Thank's for your answer, but i disable the pptp server and i have the same problem with quick vpn

    u can send me the doc to : francois.mailing@free.fr

    Thank's in advance.


  4. YeOldeStonecat

    YeOldeStonecat Network Guru Member

    What happened to that guide that was posted here a while ago? On the QuickVPN client setup.
  5. DocLarge

    DocLarge Super Moderator Staff Member Member

    They took it off... No worries, I've updated it, so I'll try sending it to Simon again and get him to post it.

  6. YeOldeStonecat

    YeOldeStonecat Network Guru Member

    DocLarge, you mind sending me a copy? I remember reading it a while ago...just would be good to have for a reference.

    <=== at Gmail
  7. iconeater

    iconeater Network Guru Member

  8. YeOldeStonecat

    YeOldeStonecat Network Guru Member

  9. NerdsLogic

    NerdsLogic Network Guru Member

    QuickVPN and Windows XP Service Pack 2 Solution

    For those of you who are having problem to connect using QuickVPN while Windows XP SP2 is enabled (Test to see if it works while it's disabled, if it does, then this is your fix so you can leave the XP Firewall on"



Share This Page