1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

rv082 -> Watchguard SOHO VPN

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Pryach, Jan 17, 2007.

  1. Pryach

    Pryach LI Guru Member

    I'm having two problems with my rv to Watchguard VPN. The first problem being that the tunnel seems to drop for no reason. In my Watchguard logs I get the following:

    10.0.0.1 and 5.5.5.5 is the internal and external IPs of the rv082. 192.168.20.90 is an IP on the Watchguard side of things.

    I get the following in the Linksys log:

    24.24.24.24 is the external IP of my watchguard.


    Most of the time the tunnel works fine, but I'm not sure why it's dropping like this (seems to happen fairly randomly, it could happen twice in an hour or be up all day long).


    The other problem I have is it appears that one of these two routers is blocking certain traffic. The traffic originates on the linksys side and is going to the watchguard side on port 8100. Basically the data just sits there and an error is eventually reported. However, neither of the routers show any blocked packets in their logs.
     

Share This Page