1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RV120W VPN setup for QuickVPN use - Help Needed

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by tmscaf, Feb 29, 2012.

  1. tmscaf

    tmscaf Networkin' Nut Member

    I've been trying to do a real BASIC VPN setup with my RV120W. Firmware has been updated to the most recent version,
    The most "success" I've had is that it will hang at "Connecting".

    My current information that I feel relevant is as follows:
    Network IP that I'll VPN'ing into:
    No set location to VPN from as I'll be using the QuickVPN client.
    Site I'll be VPN'ing into does have a FQDN.


    Ike Policy Table is as follows:

    Policy Name: Test
    Direction / Type: Responder
    Exchange Mode: Aggressive

    Identifier Type: FQDN
    identifier: local.com

    Identifier Type: FQDN
    identifier: remote.com

    IKE SA Paramters
    Encryption Algorithm:default
    Authentication Algorithm:default
    Authentication Method:default
    Pre-Shared Key: <my key>
    Diffie-Hellman (DH) Group:default

    Extended Authentication
    xauth type: edge device
    authentication type: user database


    HTTPS Web Access is ENABELED

    I would like user authentication to happen on the RV120W so a user profile was created, with a password.

    My main goal is pretty simple. I want to be able to VPN into my home network so that I can RDP PC's to assist with my older family members that may need help.
    Secondary goal, I have a "server" that I wouldn't the ability of using UNC paths.....

    Nothing special about this network compared to many others. Just a "simple" setup.

    Please help!

    Thanks for any and all help
  2. Toxic

    Toxic Administrator Staff Member

Share This Page