1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RVL200 to BEFSX41 VPN connection?

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by thost, Nov 20, 2006.

  1. thost

    thost Guest


    I have a RVL200 and BEFSX41 that I try to setup as a router to router VPN connection,
    Now I have read a lot of setup configuration and suggestion and I have tried a lot of different configs, but it does not work for me.

    The VPN tunnel is connected it says on both ends but I can´t ping or connect to anything in the other end.
    they are on different subnets ( and
    and for the moment I have static wan ip on both.

    Any suggestion please?


    at the head site (RVL200) there is a other GW also and when I was there and set ip config on my laptop manual with RVL200 as default gateway, I was able to ping other site (BEFSX41 side).
    So my problem is not with the VPN tunnel as far as I can see.
    My problem is at main site where I have 2 GW and I need both also, to get devices to understand when to use the right GW.
    One GW is to a "Phone switch" and the RVL200 I will only use as a VPN GW, it´s not for any internet traffic. And there is a local server that act as a DHCP and web server.


Share This Page