1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RVS4000 to Cisco PIX

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by phoenix13, Sep 25, 2007.

  1. phoenix13

    phoenix13 Guest

    I need help getting my RVS4000 to connect to our Cisco PIX at work. Has anyone gotten this to work and if so what feedback can you provide. If you need information about our setup to help let me know and I'll provide all the info.

    Thanks!
     
  2. ifican

    ifican Network Guru Member

    I have gotten a wrv200 and a pix to talk so it should work. The goofy thing i ran into was the pix by default was trying to identify the tunnel by fqdn and not ip like it was suppose too. Once i figured that out it connected without incident. If you believe all is good the best thing for you to do is look at the logs on both devices, if need be post it or send me a PM and ill help you figure it out.
     
  3. DocLarge

    DocLarge Super Moderator Staff Member Member

Share This Page