1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Satori 4.0 & WRE54G?????

Discussion in 'Sveasoft Firmware' started by Shepp, Feb 10, 2005.

  1. Shepp

    Shepp Network Guru Member

    Has anyone got these two to run together? I was running Satori 4.0 and decided to try connecting a wre54g range expander (with the linksys firmware upgrade) to my WRT54G v.1 router. Nothing I tried worked. I flashed the router with Linksys's recent firmware upgrade v3.03.6 and it connected with no trouble at all, infact I am using it now to connect from the basement. Anyway, I have seen posts on the subject but no remedies.

    Thanks in advance.
    Shepp
     
    Shepp, Feb 10, 2005
    #1
  2. MLD

    MLD Network Guru Member

    I have connected the two. On the router use wireless>WDS tab select lan from the drop down and enter in the wirless IP from the WRE. Save and you should be working.
     
    MLD, Feb 10, 2005
    #2
  3. Shepp

    Shepp Network Guru Member

    Thanks for the tip MLD. This did work but I had to enter the MAC address rather then the IP. Then rebooted the wireless machines and away we go. WRE54G works well with the new firmware from Linksys.


    Thanks Again
    Shepp
     
    Shepp, Feb 12, 2005
    #3
  4. gglabannane

    gglabannane Network Guru Member

    ---> Shepp

    On your WRT54G do you use SATORI ?
     
    gglabannane, May 3, 2005
    #4

Share This Page