1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sbc, wrt54gl 1.1, & raf

Discussion in 'Tomato Firmware' started by timocil, Jan 9, 2011.

  1. timocil

    timocil Networkin' Nut Member

    I have been lurking these forums for quite a while now and have had to finally commit to registering because of a problem I am having. My isp for the last few years has been AT&T DSL which I've had no complaints with (package wise). I've recently just moved and reordered the same service however I am completely unable to correctly gain internet with modem in bridge mode and pppoe set in tomato. I've rechecked my network passcode multiple times as well as e-mail used. Can not make a connection.. what am I missing?

    Connection works fine with router set to dhcp and PPP On Modem. Driving me crazy.

    WRT54GL 1.1 running Tomato Firmware RAF1.28.121006
     
  2. TT76

    TT76 Networkin' Nut Member

    check out tomato logs, that will be helpful.
     
  3. Toastman

    Toastman Super Moderator Staff Member Member

    Just a suggestion - recently the pppoe section has been changed. Try an old tomato version first, see if the problem goes away. Victek's 8515.2 for example.
     
  4. timocil

    timocil Networkin' Nut Member

    I have done so (Tomato RAF Firmware v1.28.8515 _RAF ND Std). The same problem persists. I have noticed that I have a completely new IP range (was 78.*.*.* now 99.*.*.*) from SBC but it seems to me that any firmware I use is not connecting over PPPoE. Have not tried linksys stock or DD-WRT but multiple tomato versions. Nothing I see in the log is evidence of the problem. I guess I will have to continue to double NAT for now.

    I've done multiple 30/30/30 reset alongside manually erasing NVRAM multiple times.. I've tried unsuccessfully for hours and very fed up (lol). Had this successfully working for over a year until moved. Same hardware just new password and beginning to wonder if this could be on at&t's side?
     
  5. Toastman

    Toastman Super Moderator Staff Member Member

    Curious. I think you've probably done everything right, I can imagine how frustrated you feel. Only thing I can suggest is, post details of your ISP connection and type, and a screenshot or details of your WAN setup details - just in case. Also, the details from your log on what happens at connection time. Which should look something like this:

    Jan 10 08:30:20 A daemon.info pppd[9231]: RP-PPPoE plugin version 3.10 compiled against pppd 2.4.5
    Jan 10 08:30:20 A user.info redial[9233]: Started. Time: 30
    Jan 10 08:30:20 A daemon.notice pppd[9232]: pppd 2.4.5 started by root, uid 0
    Jan 10 08:30:20 A daemon.debug pppd[9232]: PADS: Service-Name: ''
    Jan 10 08:30:20 A daemon.info pppd[9232]: PPP session is 7003 (0x1b5b)
    Jan 10 08:30:20 A daemon.warn pppd[9232]: Connected to 00:30:88:01:74:ed via interface vlan2
    Jan 10 08:30:20 A daemon.debug pppd[9232]: using channel 9
    Jan 10 08:30:20 A daemon.info pppd[9232]: Using interface ppp0
    Jan 10 08:30:20 A daemon.notice pppd[9232]: Connect: ppp0 <--> vlan2
    Jan 10 08:30:20 A daemon.warn pppd[9232]: Couldn't increase MTU to 1500
    Jan 10 08:30:20 A daemon.warn pppd[9232]: Couldn't increase MRU to 1500
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x69413b8f>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [LCP ConfReq id=0x72 <mru 1492> <auth pap> <magic 0x5c2c9d4f>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [LCP ConfAck id=0x72 <mru 1492> <auth pap> <magic 0x5c2c9d4f>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [LCP ConfAck id=0x1 <mru 1492> <magic 0x69413b8f>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [LCP EchoReq id=0x0 magic=0x69413b8f]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [PAP AuthReq id=0x1 user="killmenow9@rottenconnect" password=<hidden>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [LCP EchoRep id=0x0 magic=0x5c2c9d4f]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [PAP AuthAck id=0x1 ""]
    Jan 10 08:30:20 A daemon.notice pppd[9232]: PAP authentication succeeded
    Jan 10 08:30:20 A daemon.notice pppd[9232]: peer from calling number 00:30:88:01:74:ED authorized
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [IPCP ConfReq id=0x1 <addr 192.168.1.1> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [IPCP ConfReq id=0x14 <addr 194.120.192.1>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [IPCP ConfAck id=0x14 <addr 194.120.192.1>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [IPCP ConfNak id=0x1 <addr 194.120.192.163> <ms-dns1 209.144.207.49> <ms-dns2 209.144.207.29>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: sent [IPCP ConfReq id=0x2 <addr 194.120.192.163> <ms-dns1 209.144.207.49> <ms-dns2 209.144.207.29>]
    Jan 10 08:30:20 A daemon.debug pppd[9232]: rcvd [IPCP ConfAck id=0x2 <addr 194.120.192.163> <ms-dns1 209.144.207.49> <ms-dns2 209.144.207.29>]
    Jan 10 08:30:20 A daemon.notice pppd[9232]: local IP address 194.170.192.163
    Jan 10 08:30:20 A daemon.notice pppd[9232]: remote IP address 194.120.192.1
    Jan 10 08:30:20 A daemon.notice pppd[9232]: primary DNS address 209.144.207.49
    Jan 10 08:30:20 A daemon.notice pppd[9232]: secondary DNS address 209.144.207.29
    Jan 10 08:30:20 A daemon.debug pppd[9232]: Script /tmp/ppp/ip-up started (pid 9249)
    Jan 10 08:30:22 A daemon.info dnsmasq[8864]: reading /etc/resolv.dnsmasq
    Jan 10 08:30:22 A daemon.info dnsmasq[8864]: using nameserver 209.144.207.29#53
    Jan 10 08:30:22 A daemon.info dnsmasq[8864]: using nameserver 209.144.207.49#53
     
  6. timocil

    timocil Networkin' Nut Member

    SBC AT&T DSL supposed to be 3mbps plan.

    They had a nightmare getting the dsl line activated to my home because squirrels have been nesting/chewing the wires all up. Guy took about 3 hours in snowy weather to get my new dsl line on a Saturday. When ordering they tried telling me I could only get the elite (6mbps) plan by ordering home phone service as well. A second rep told me the first rep was incorrect but that my home was not available for the elite package. The technician this past Saturday though assured me I could and also get uverse if I so wanted. Anyways, this is what it's at right now so says the modem:

    Connected at 2080 Kbps (downstream) 192 Kbps (upstream)
    ###########################################
    Modem: Speedstream 5100
    Router: WRT54GL 1.1 (Tomato RAF Firmware v1.28.8515 _RAF ND Std)
    Single PC connected via Ethernet to WRT54GL

    Basically it does this when trying to connect via pppoe.. seems to be no connection attempt..

    Jan 9 21:51:28 unknown user.info redial[2730]: WAN down. Reconnecting...
    Jan 9 21:51:28 unknown daemon.info dnsmasq[2728]: exiting on receipt of SIGTERM
    Jan 9 21:51:28 unknown daemon.info dnsmasq[2901]: started, version 2.55 cachesize 150
    Jan 9 21:51:28 unknown daemon.info dnsmasq[2901]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts TFTP
    Jan 9 21:51:28 unknown daemon.info dnsmasq-dhcp[2901]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jan 9 21:51:28 unknown daemon.warn dnsmasq[2901]: no servers found in /etc/resolv.dnsmasq, will retry
    Jan 9 21:51:28 unknown daemon.info dnsmasq[2901]: read /etc/hosts - 0 addresses
    Jan 9 21:51:28 unknown daemon.info dnsmasq[2901]: read /etc/hosts.dnsmasq - 2 addresses
    Jan 9 21:51:35 unknown daemon.info pppoe[2905]: Starting
    Jan 9 21:51:35 unknown daemon.info pppoe[2905]: Sending PADI.
    Jan 9 21:51:35 unknown user.info redial[2904]: Started. Time: 90
    Jan 9 21:51:37 unknown user.notice kernel: klogd: exiting
    Jan 9 21:51:37 unknown syslog.info syslogd exiting
    Jan 9 21:51:38 unknown syslog.info syslogd started: BusyBox v1.17.2
    Jan 9 21:51:39 unknown user.notice kernel: klogd started: BusyBox v1.17.2 (2010-09-18 17:41:34 CEST)
    Jan 9 21:51:55 unknown daemon.info pppoe[2905]: Resending...
    Jan 9 21:52:04 unknown daemon.info pppoe[2905]: Resending...
    Jan 9 21:52:12 unknown daemon.info pppoe[2905]: Resending...


    [​IMG] [​IMG]
     
  7. Toastman

    Toastman Super Moderator Staff Member Member

    Setting look OK, but there is obviously no ADSL connection taking place. I would suspect the modem. From what you say I assume the modem is reaching sync and you have a steady connection light. But there's apparently no communication taking place from Tomato through the modem. Is there something wrong with the bridge mode setting on that modem? Something you've overlooked? It's a popular one but I've never seen one myself, maybe someone else who is using one can offer some help.

    Curious about this comment

    Where do you obtain this information? The modem? Is it in bridge mode at all?
     
  8. TT76

    TT76 Networkin' Nut Member

    try to connect your computer to modem directly and create a ADSL connection, if it works, try to set up WAN type to DHCP in router and ping modem to make sure that your WAN port works normally.
     
  9. timocil

    timocil Networkin' Nut Member

    I am currently using the internet in the home with PPP on Modem set in modem and DHCP set in tomato on my rouer. I am connected via ethernet and wifi is enabled so roommate can access via laptop. Fine for time being.. afraid going to have connection issues when a third roommate will be moving in next month.

    Here is some modem info I am relaying from its IP of 192.168.0.1 address:

    3 Model Number 5100
    4 Friendly Name SpeedStream 5100 ADSL Modem
    10 Modem Software Version 1.0.0.39
    30 Modem Health Status ok
    31 DSL Link Status up
    32 Time Since Last Sync 000 days 14:34:31
    36 Internet Status up
    37 Ethernet Link Status up
    38 PPP Connection Status connected
    39 PPP Last Connection Error None
    40 PPP Uptime 000 days 09:59:27

    94 Conf VPI 0
    95 Conf VCI 35
    99 VC Encapsulation LLC

    119 LAN DHCP Server Enabled true
    120 DHCP Subnet Mask 255.255.0.0
    121 DHCP Start IP Address 192.168.1.64
    122 DHCP End IP Address 192.168.1.64
    123 DHCP Default Gateway 192.168.0.1

    140 Current Rate 2080 192

    270 Internet Connection Type PPPoE
    271 Modem Configuration Single Device Router
    272 NAPT Enabled true
    273 Modem IP Address 192.168.0.1
    274 Modem Net Mask 255.255.0.0

    Some sceen caps of modem pages while PPP on Modem enabled:
    Do not have Bridged enabled at the moment since I lose all internet
    connection with router so just have it selected to show you I choose
    that in at attempt for a single NAT..

    [​IMG] [​IMG]
    [​IMG]


    Using DHCP:

    Jan 10 12:00:09 unknown daemon.info udhcpc[3639]: Sending renew...
    Jan 10 12:00:09 unknown daemon.info udhcpc[3639]: Lease of 99.97.83.161 obtained, lease time 600


    Switching from DHCP to PPPoE on router after putting modem into Bridged mode:
    Jan 10 12:40:09 unknown daemon.info udhcpc[3639]: Lease of 99.97.83.161 obtained, lease time 600
    Jan 10 12:45:09 unknown daemon.info udhcpc[3639]: Sending renew...
    Jan 10 12:45:51 unknown daemon.warn dnsmasq[4534]: no servers found in /etc/resolv.dnsmasq, will retry
    Jan 10 12:45:52 unknown daemon.info dnsmasq[4534]: exiting on receipt of SIGTERM
    Jan 10 12:45:52 unknown daemon.info udhcpc[3639]: Unicasting a release of 99.97.83.161 to 192.168.0.1
    Jan 10 12:45:52 unknown daemon.info udhcpc[3639]: Sending release...
    Jan 10 12:45:52 unknown daemon.info udhcpc[3639]: Entering released state
    Jan 10 12:45:52 unknown daemon.info udhcpc[3639]: Received SIGTERM
    Jan 10 12:45:52 unknown user.debug kernel: vlan1: del 01:00:5e:00:00:01 mcast address from vlan interface
    Jan 10 12:45:52 unknown user.debug kernel: vlan1: del 01:00:5e:00:00:01 mcast address from master interface
    Jan 10 12:45:52 unknown user.info kernel: br0: port 2(eth1) entering disabled state
    Jan 10 12:45:52 unknown user.info kernel: br0: port 1(vlan0) entering disabled state
    Jan 10 12:45:52 unknown user.debug kernel: vlan0: dev_set_promiscuity(master, 1)
    Jan 10 12:45:52 unknown user.info kernel: br0: port 1(vlan0) entering disabled state
    Jan 10 12:45:52 unknown user.info kernel: device vlan0 left promiscuous mode
    Jan 10 12:45:52 unknown user.info kernel: br0: port 2(eth1) entering disabled state
    Jan 10 12:45:52 unknown user.info kernel: device eth1 left promiscuous mode
    Jan 10 12:45:53 unknown user.notice kernel: klogd: exiting
    Jan 10 12:45:53 unknown syslog.info syslogd exiting
    Jan 10 12:45:53 unknown syslog.info syslogd started: BusyBox v1.17.2
    Jan 10 12:45:54 unknown user.notice kernel: klogd started: BusyBox v1.17.2 (2010-09-18 17:41:34 CEST)
    Jan 10 12:45:55 unknown user.info kernel: device eth1 entered promiscuous mode
    Jan 10 12:45:55 unknown user.info kernel: br0: port 2(eth1) entering learning state
    Jan 10 12:45:55 unknown user.info kernel: br0: port 1(vlan0) entering learning state
    Jan 10 12:45:55 unknown user.info kernel: br0: port 2(eth1) entering forwarding state
    Jan 10 12:45:55 unknown user.info kernel: br0: topology change detected, propagating
    Jan 10 12:45:55 unknown user.warn kernel: vlan1: Setting MAC address to <6>br0: port 1(vlan0) entering forwarding state
    Jan 10 12:45:55 unknown user.info kernel: br0: topology change detected, propagating
    Jan 10 12:45:55 unknown user.warn kernel: 00 21 29 71 4f 60.
    Jan 10 12:45:55 unknown user.info redial[5057]: Started. Time: 90
    Jan 10 12:45:55 unknown daemon.info pppoe[5056]: Starting
    Jan 10 12:45:55 unknown daemon.info pppoe[5056]: Sending PADI.
    Jan 10 12:45:55 unknown daemon.info dnsmasq[5061]: started, version 2.55 cachesize 150
    Jan 10 12:45:55 unknown daemon.info dnsmasq[5061]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts TFTP
    Jan 10 12:45:55 unknown daemon.info dnsmasq-dhcp[5061]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jan 10 12:45:55 unknown daemon.warn dnsmasq[5061]: no servers found in /etc/resolv.dnsmasq, will retry
    Jan 10 12:45:55 unknown daemon.info dnsmasq[5061]: read /etc/hosts - 0 addresses
    Jan 10 12:45:55 unknown daemon.info dnsmasq[5061]: read /etc/hosts.dnsmasq - 2 addresses
    Jan 10 12:45:55 unknown user.info init[1]: Linksys WRT54G/GS/GL
    Jan 10 12:45:55 unknown cron.info crond[5067]: crond: crond (busybox 1.17.2) started, log level 8
    Jan 10 12:46:05 unknown daemon.info pppoe[5056]: Resending...
    Jan 10 12:46:07 unknown daemon.info dnsmasq[5061]: exiting on receipt of SIGTERM
    Jan 10 12:46:07 unknown daemon.info dnsmasq[5126]: started, version 2.55 cachesize 150
    Jan 10 12:46:07 unknown daemon.info dnsmasq[5126]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts TFTP
    Jan 10 12:46:07 unknown daemon.info dnsmasq-dhcp[5126]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jan 10 12:46:07 unknown daemon.warn dnsmasq[5126]: no servers found in /etc/resolv.dnsmasq, will retry
    Jan 10 12:46:07 unknown daemon.info dnsmasq[5126]: read /etc/hosts - 0 addresses
    Jan 10 12:46:07 unknown daemon.info dnsmasq[5126]: read /etc/hosts.dnsmasq - 2 addresses
    Jan 10 12:46:14 unknown user.info redial[5128]: Started. Time: 90
    Jan 10 12:46:14 unknown daemon.info pppoe[5129]: Starting
    Jan 10 12:46:14 unknown daemon.info pppoe[5129]: Sending PADI.
    Jan 10 12:46:24 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:46:34 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:46:37 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:46:46 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:46:55 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:46:58 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:47:07 unknown daemon.info pppoe[5129]: Resending...
    Jan 10 12:47:13 unknown daemon.info pppoe[5129]: Resending...
     
  10. TT76

    TT76 Networkin' Nut Member

    you should select option 2 PPP is on the computer. That is why I get you to try to connect your PC to modem and dial.
     
  11. timocil

    timocil Networkin' Nut Member

    Have tried that as well. Same Result.
     
  12. TT76

    TT76 Networkin' Nut Member

    hmmm,but option 2 is pretty much the only right one. have you tried to connect pc to the modem and dial on pc as I said?
     
  13. timocil

    timocil Networkin' Nut Member

    yes I am posting from a pppoe connection dialed from the computer. the Internet icon is not even lit right now on the modem. Always used to be green.


    I finally got a 12v adapter I ordered from HK for this ASUS RT-N12 I bought off ebay. Have dd-wrt v24 running on it and tried PPPoE on Modem with it and couldn't get it to connect either. Dunno what's up :(
     
  14. c6comp

    c6comp Guest

    Make sure you have no Service Name set for it in the config. I was bashing my head at this same problem. Your service name has to be blank for some reason, else it wont connect.
     
  15. timocil

    timocil Networkin' Nut Member

    WOW. Let me first state that I knew I had some line trouble when I was only receiving 2mbps/192k. Had a technician come out. He performed some work on the outside lines but also found the cable from my basement to my outside box where the wire from the pole comes in to was bad. Replaced that cable and now I'm rocking a clean 3mbit/512k line! Lastly, I followed your suggestion about leaving the service blank and PPPoE connected instantly! Not sure if it was the combination of these two or your suggestion alone but it's working now boyeeee!!! :D So happy now :D
     

Share This Page