1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scanner software for WPC54GS

Discussion in 'Other Linksys Equipment' started by marchem, Jul 19, 2004.

  1. marchem

    marchem Network Guru Member

    Does anyone know of any scanning software (Windows) that works with the WPC54GS, besides the LinkSys monitor software?

    I tried NetStumbler, but it didn't recognize the card (Dell laptop with W2K). Maybe there's additional drivers that need to be loaded???

    Thanks, Rob
     
  2. Mario_from_Hamburg

    Mario_from_Hamburg Network Guru Member

    hi rob,

    i hope you understand my very bad english :oops:
    but i think you know what i mean :lol:

    open netstumpler, click on "Device".
    there you can select the driver.
    netstumpler works with WPC54G, so i think it works with the WPC54GS too.

    greets from germany
    mario
     
  3. Esquire

    Esquire Mesquire Staff Member Member

    I don't know if this will help, but I'm running my WPC54G v.1 with a WPC54GS driver on Windows XP and NetStumbler works fine with it.
     
  4. marchem

    marchem Network Guru Member

    Thanks. I'll give it a try again this evening. It's my wife's laptop so I only get access to it nights. I'll play around with the various drivers and see what happens.
     
  5. Morpheus

    Morpheus Network Guru Member

    NetStumbler will not work with my WPC54G-UK. v1.2 :cry:
     
  6. Mario_from_Hamburg

    Mario_from_Hamburg Network Guru Member

    @morpheus

    did you find your card in the "Device" from netstumpler :?:
     
  7. Morpheus

    Morpheus Network Guru Member

    No thers nothing in Device :cry:
     
  8. Mario_from_Hamburg

    Mario_from_Hamburg Network Guru Member

    @morpheus
    ok, try the following:
    change the card modus from mixed into 54 mbit only
    save the settings and start netstumpler
    click at device and you should see the driver (Wireless-G Notebook Adapter
    NDIS 5.1) for your card.
    take a click on it and it's running.
    it's also possible to change your card modus later
     
  9. Morpheus

    Morpheus Network Guru Member

    Thank you
    Mario_from_Hamburg
    Working 100% now :wink: :wink: :lol:
     
  10. Mario_from_Hamburg

    Mario_from_Hamburg Network Guru Member

    Great! :D
    or in german:
    sehr schön!
     
  11. yonnage

    yonnage Network Guru Member

    I didnt think netstumber worked with broadcom chipsets like the ones used withthe WPC54g and WMP54G?
     
  12. Esquire

    Esquire Mesquire Staff Member Member

    It does now - I couldn't get the program to work until its version 0.4 came out.
     
  13. yonnage

    yonnage Network Guru Member

    oooh, I'll get it on my laptop and see what I get from my WAG54G.
     

Share This Page