SD Card mod on WRT54GS version 1.1

Discussion in 'Modding Forum' started by blabla, Sep 18, 2005.

  1. blabla

    blabla Network Guru Member

    I have an wrt54gs v.1.1 an will do the sd-card mod with this router.
    Can erverybody tell me the soldering points of this board, for the mod?

    2 cards are brocken, and i don`t cant find infos for the mod in an gs.

    the " rp3 " from kilkol, is on my board bzw. by the leds ant not on cpu.

    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
    eth1: Broadcom BCM4320 802.11 Wireless Controller
    CPU: BCM4712 rev 1 at 240 MHz

    Im need also infos for the wiring and solder points in a gs 1.1.
  2. Toxic

    Toxic Administrator Staff Member

  3. blabla

    blabla Network Guru Member

    Under the link is the serial port mod ?!
    I needinfos about the sd card mod.
  4. ludo37

    ludo37 Network Guru Member

  5. rdobosz

    rdobosz Network Guru Member

  6. drukenslob

    drukenslob LI Guru Member


    Im trying to attempt this too. Are there any sites with pics pointing to all the gpio points for v1.1?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice